Brazil

This work presents the Link-Quality Aware and Thermal Aware On-Demand Routing (LATOR) protocol, a proposal for routing in Wireless Body Area Networks (WBAN). LATOR improves Packet Delivery Rate (PDR) in intra-WBAN communication with node overheating prevention. This protocol avoids overheating considering only each node’s temperature without exchanging temperature information between neighboring nodes, which allows a decrease in control traffic. LATOR also considers route selection based on Link Quality Information (LQI). Initially the Received Signal Strength Indicator (RSSI) was considered as LQI. The proposal was implemented and evaluated using the Castalia framework over the OMNET++ simulator. Experimental results show that LATOR allows better PDR performance, especially when the direct communication presents low quality and there is an alternative path with better quality. At the same time, overheating in the network is avoided and PDR adequate performance is maintained. Although LATOR increases end-to-end latency, it can be considered a viable alternative for WBANs applications.

IWSSIP 2020

LATOR: Link-Quality Aware and Thermal Aware On-Demand Routing Protocol for WBAN

routing

ieee 802.15.6

wban

wireless body area networks

The purpose of the AAAI conference series is to promote research in Artificial Intelligence (AI) and foster scientific exchange between researchers, practitioners, scientists, students, and engineers across the entirety of AI and its affiliated disciplines. AAAI-23 is the Thirty-Seventh AAAI Conference on Artificial Intelligence. The theme of this conference is to create collaborative bridges within and beyond AI. Like previous AAAI conferences, AAAI-23 will feature technical paper presentations, special tracks, invited speakers, workshops, tutorials, poster sessions, senior member presentations, competitions, and exhibit programs, and two new activities: a Bridge Program and a Lab Program. Many of these activities are tailored to the theme of bridges and all are selected according to the highest standards, with additional programs for students and young researchers. 
AAAI is providing you with a conference planner, which you can use to help organize your itinerary of activities. This includes talks to attend in person, talks to attend remotely, breaks with colleagues and your site seeing activities. To access this conference planner, please go to [https://aaai-2023.takemobi.io](https://aaai-2023.takemobi.io).

In order to access this site, you need to register. If you haven't already, please register [here](https://aaai.org/Conferences/AAAI-23/registration/).


AAAI 2023

The purpose of the AAAI conference series is to promote research in Artificial Intelligence (AI) and foster scientific exchange between researchers, practitioners, scientists, students, and engineers across the entirety of AI and its affiliated disciplines.

technical paper

The 27th International Conference on Systems, Signals and Image Processing.

This presentation is composed of two main contributions. The first one concerns the segmentation of plantar foot thermal images. It consists of using the deep learning method U-Net to segment the thermal images. U-Net is trained by combining the two types of images (thermal and color) given by the thermal camera FLIR ONE Pro. Results show that this multimodal approach performs better than the one using only
thermal images, especially for difficult cases. The second part is devoted to a transversal clinical study conducted within the Hospital National Dos de Mayo in Lima, Peru. 122 type II diabetic patients without ulcer were recruited. These individuals were classified into three risk groups of developing a foot ulcer. This
classification is based on a medical examination: a low-risk group (R0), a medium-risk group (R1) and finally a high-risk group (R2).The results demonstrate that thermal camera temperature assessment could help in the diagnosis of diabetic foot.

Segmentation of Plantar Foot Thermal Images: Application to Diabetic Foot Diagnosis

Query performance prediction (QPP) is the namegiven to approaches that aim at predicting, usually post-query, thequality of results generated by an IR system. Yet, the indirect waythat standard QPP approaches estimate performance is opaque,has little relation to the way users evaluate queries, and islimited in application. An alternative, more challenging way tolook at the QPP problem is as arelevance predictionproblem.Instead of resulting in a quality estimate, relevance predictionaims at predicting the relevance of the top-k results in a rank.When accurate, those predictions can be directly employed as amechanism to improve the initial rank. In this work, we explorea learning framework based on sequence labeling combined withcontextual features for relevance prediction. Sequence labelingis a common approach to deal with sequential data, learningfrom the sequence to generate a sequence of predicted labels.The context within a rank, that is, the neighborhood of rankedobjects, has been successfully explored within rank-aggregationand re-ranking scenarios, and here we extend the idea to devisean effective relevance prediction feature. We show that thecombination of both can beat the baseline relevance predictionapproach, performing effective prediction, that is accurate for upto k = 30 positions.

Contextual Features and Sequence Labeling Techniques for Relevance Prediction in Retrieval

Personalized music systems usually rely on manual song annotations (tags) as a mechanism for querying and navigating large music collections. However, the manual annotation is a hard task given the large amount of music available nowadays. Automatic song annotation based on content analysis is a potential solution to this problem and has recently been gaining attention. In this work, we propose to extend the Stacking prediction framework to use Convolutional Neural Networks (CNNs) in order to improve music tag annotation task. In general, the Stacked prediction consists of a technique in which the output of the first stage of learning is used as input in the second stage. In our work we have tried two proposals of extension. The first one consists of using the weights learned by the CNN in the first stage of training as input in the second stage. In the second proposal, we use the autoencoder technique with the weights learned by CNN in the first stage to generate images 50% smaller than the ones used as input of the first stage. The weights and the images obtained in the first stage are used as input in the second stage. We evaluated our proposals with five different CNN models in three datasets well-known in the literature (FMA, MillionSong, and MagnaTagATune), obtaining interesting results.

Improving Musical Tag Annotation with Stacking and Convolutional Neural Networks

The number of Distributed Denial of Service (DDoS) attacks using IoT devices has increased in recent years. Reasons for this growth include the security limitations of IoT devices, the number of devices, and their geographic distribution. Developing mechanisms to detect and mitigate DDoS attacks in this scenario is a current challenge in the area of network security. In the literature review, it is seen that recent academic works still tries to find the best way to combat this type of threat, with proposals that need to be tested against modern datasets that contain a diversity of modern denial of service attacks. This work proposes a detection module for an IoT controller that uses Machine Learning techniques to classify network traffic. The system was designed in the Software-Defined Networks (SDN) context and evaluated on an emulated platform using three actual and well-know datasets present in the literature. The results, at a sampling rate of 20% of network traffic, show a high precision, above 93%, a low false alarm rate, and detection rate of attacks above 96%, using a low profile emulated device.

Smart Detection-IoT: A DDoS Sensor System for Internet of Things

Ultrasonic signals are widely used to detect defectsand characterize materials. In this field, the Total Focusing Method (TFM) imaging approach is commonly applied to post-process the ultrasonic data acquired by the Full Matrix Capture (FMC) of an array of ultrasonic transducers. Although the traditional FMC-TFM technique is considered as a reference standard, the energy transmitted in the material is limited by the use of a single transmitting element of the array and hence may provide a poor signal-to-noise ratio of the reconstructed image. To overcome this limitation and improve the image quality of highly noisy materials, this paper combines two noise-reduction methods, namely a modified Spatially Averaged Sub-ApertureCorrelation Imaging and virtual sources. In the former, we further propose a modification in order to avoid the manual fine-tuning of a parameter presented in the original approach. The second consists of using several transmitting elements to increase theenergy transmitted in the medium. Results showed that this combination was able to increase in 39dB the signal-to-noise ratio. This result is 4.2dB above the sum of individual gains of each technique which indicates a synergistic effect on increasing the image quality. Moreover, the use of virtual sources was capable of improving the reconstructed image where initially it is not possible to distinguish the noise from the desired signal. The application of the correlation approach in this scenario increased the quality of the reconstructed image significantly. The proposed combination was validated in a finite element model of a steel block with side-drilled holes used to mimic internal flaws in the material. Several noise levels were added to the numerically simulated signals in order to evaluate the performance of the proposed approach.

Improvement of Ultrasonic Image by a Combination of Correlation-Based Image Processing and Virtual Sources Applied to Non-Destructive Evaluation

In this contribution a design of a full polarimetric multi-channel Ground Penetrating Radar (GPR) with optimized antenna switching is presented. Firstly, a single-polarized system was used to obtain multiple measurements of a static scene with different antenna orientation and providing a full polarimetric dataset. Laboratory experiments have been performed on metal test landmines and where promising results have been obtained. The single-polarized radar system was modified to a multichannel system with focus on decreasing the scanning time. The selected frequency range covers the band of 550 MHz to 2.7 GHz, which corresponds in soil to a range resolution of approximately 7 cm. There was no need to use a Power Amplifier (PA) at the transmitter stage, since a highly sensitive receiver is implemented. This greatly decrease the power consumption and makes the device suitable for battery powered platforms. Physical contact between the ground and antennas was avoided with using the air-launched measurement technique, where additionally the level of safety is higher.

Design of a Full Polarimetric GPR System for Landmine Detection

The presentation focus signal processing techiniques appliend on the ATLAS experiment, present on the LHC machine. It compares two energy estimation methods in high pile-up scenario using LHC collision data.

Energy Reconstruction Performance in the ATLAS Tile Calorimeter Operating at High Event Rate Conditions Using LHC Collision Data

Blur and other undesirable visual artifacts are often produced from simple interpolation methods when applied to magnification from low-resolution into higher resolution images. This work evaluates the effect of existing sharpening filters when applied to images obtained from interpolation in order to determine whether image quality can be improved. Additionally, a novel sharpening filter is proposed which uses information from the interpolation process to prevent the occurrence of blur. The novel filter is shown to achieve better results when compared to other sharpening filters from the literature.

An Empirical Evaluation of Sharpening Filters Applied to Magnified Images

In the new context of smart grids (SGs), new types of electric disturbances may occur in the electrical power systems (EPSs) current and voltage waveforms. The detection and the study of such disturbances can be useful in the operation and control of the EPSs. In order to identify any waveform abnormality or variation, novelty detectors might be used. This work presents a novelty detection technique for power quality signals based on surrogates and distances calculated in the time-frequency domain. Surrogates are signals created with the same magnitude of the Fourier spectrum from the original signal, but with the phase spectrum generated from a random uniform distribution. Tests using several cases of the most common power quality disturbances using synthetic signals were conducted. A comparison with an energy-based novelty detector currently present in the literature is performed, showing better performance results in terms of the receiver operating characteristic (ROC) curve parameters. Also, a real-life waveform signal is used to show the presented technique in action. The surrogate technique presented in this work can be useful in the definition of the novelties ground-truth for real power signal waveforms.

Novelty Detection in Power Quality Signals with Surrogates: a Time-Frequency Technique

One of the goals of the music information retrieval (MIR) community is to research new methods and create new systems that can efficiently and effectively retrieve and recommend songs from large databases of music content. Despite the volume of research in the area, there is a lack of music databases to support these works, i.e. databases that comply with some quite desirable requirements for the development of researches, such as: a huge amount of music pieces, the audio signal availability and a great diversity of audio attributes. In order to contribute to the MIR community, we present Music4All, a new music database which contains metadata, tags, genre information, 30-seconds audio clips, lyrics, and so on. Additionally, we also exemplify some MIR tasks that may benefit from our database and compare it with other databases proposed in the literature. To request the Music4All database, send an e-mail to contact4music4all@gmail.com.

Premium content

Downloads

Next from IWSSIP 2020

Segmentation of Plantar Foot Thermal Images: Application to Diabetic Foot Diagnosis

Similar lecture

Pointerformer: Deep Reinforced Multi-Pointer Transformer for the Traveling Salesman Problem

Stay up to date with the latest Underline news!

PRESENTATIONS

CONFERENCES

COMPANY

RESOURCES