United States

The past decade has seen noticeable advancements in the miniaturization of wide-band gap semiconductor technology making it feasible to be applied in demanding applications such as more-electric-aircrafts (MEA). Multiple high speed electric motors operating in parallel with current ratings in hundreds of amps are required to match the power delivery capability of conventional jet engines. As a result, the power electronics driving the motors require special attention to parallel multiple active switches in order to meet the high current requirements. This paper presents the design of an axially stator mounted 250 kW integrated modular motor drive for MEA applications. The design considerations presented include optimal component placement and layer stackup to minimize voltage overshoots during switch commutation, optimal gate drive layout to synchronize the current sharing of multiple GaN active switches, and the selection process of the on-board current sensor. Lastly, experimental test results are presented that verify the efficacy of the proposed design.

IEEE WiPDA 2022

Design of High Current, High Power Density GaN Based Motor Drive for All Electric Aircraft Application

high power density power converters

gan fets

integrated modular motor drives

ICPR 2020 is the premier international conference on Pattern Recognition, gathering leading researchers from around the world to present their latest achievements in Pattern Analysis and Recognition, applied Artificial Intelligence and Machine Learning. The topic of the year is " Putting Artificial intelligence to work on Patterns". 
For the first time, ICPR has employed a two-round review process similar to journal submissions, with new papers allowed to be submitted in either the first or second round and papers submitted in the first round and not accepted allowed to be revised and re-submitted for second round review. 

In this edition of the **ICPR 2020** Conference, there are 1407 Oral/Poster presentations organized in five Tracks: 
- Artificial Intelligence, Machine Learning for Pattern Analysis; 
- Biometrics, Human Analysis and Behavior Understanding; Computer Vision, Robotics and Intelligent Systems; 
- Document and Media Analysis; and 
- Image and Signal Processing. 

The **ICPR 2020** Main Conference program also includes 7 Keynotes from prominent world-renowned scientists, 8 Tutorials, 28 Demos, 8 Challenges, 2 Panels, as well as an Industry/Sponsor Exhibition. In addition, 41 Workshops on a range of important current and emerging research topics complete the ICPR 2020 program. 


ICPR 2020

technical paper

Download the proceedings [here](https://underline.io/events/372/lounge)
 
 
 The IEEE Workshop on Wide Bandgap Power Devices & Applications (WiPDA) provides a forum for device scientists, circuit designers, & application engineers from the Power Electronics & Electron Devices Societies to share technology updates, research findings, experience & potential applications.
 
 **Topics of interest**
* Heteroepitaxial & Bulk Materials Growth
* Gate Dielectrics & Surface Passivation
* Device Structures & Fabrication Techniques
* Device Characterization & Modeling
* Very-High Efficiency Or Compact Converters
* Safe Operating Areas Of Wide Bandgap Devices, including Short Circuit, Spike, &Transient Tolerance
* Harsh Environment (High Temperature) Operation & Reliability
* Packaging Power Modules & ICs
* Gate Drive & Other Auxiliary Circuits
* High-Performance Passive Components
* Hard-Switched & Soft-Switched Application Analysis
* Applications in Renewable Energy & Energy Storage, Transportation, Industrial Drives, Grid Power Systems, Space and Aerospace
* Wide Bandgap System Design Philosophies & Strategies
* Radio Frequency (RF) GaN
* Technology Roadmap of Wide Bandgap Including Devices, Applications and Packaging

You must register to attend this event. If you haven't done so already, please use the link below to register for the event. All registered attendees will have access to the event site on November 4th.

Registration Is Required

The IEEE Workshop on Wide Bandgap Power Devices & Applications (WiPDA) provides a forum for device scientists, circuit designers, & application engineers from the Power Electronics & Electron Devices Societies to share technology updates, research findings, experience & potential applications.

In this paper, an implantation-free 3 kV 4H-SiC Bipolar Junction Transistor (BJT) is designed, fabricated, and characterized. With a 40μm-wide Four-step Junction Termination Extension (JTE), an open base breakdown voltage (BVCEO) and an open emitter breakdown voltage (BVCBO) of more than 3000V are measured. The total width of the JTE is less than two times of the drift thickness (23μm), which can be considered as highly area efficient. The designed BJT has a 1.2μm narrow base width with 1×1017cm-3 doping, where implantation-free Ohmic contact was achieved. The BJT exhibits an excellent on-resistance of 6.7mΩ·cm2 for small size device and an on-resistance of 39.7mΩ·cm2 for large size device. The measured current gain for devices with additional anneal process is 21.

3kV 6.7MΩ·cm² 4H-SiC BJT with an Effective Junction Termination Extension (JTE)

Packaging and integration of wide bandgap power semiconductors

Managing EMI of SiC power electronics

Reliability of SiC power devices for power conversion applications

Evolution of SiC substrate production understanding and managing defects in SiC

Emerging Gallium Oxide power semiconductor materials and devices

GaN power devices: current Status, challenges, and emerging technologies

Application trends for LV GaN power transistors

Bidirectional WBG Switch Technology

This paper provides an optimization process of a 100-W three-level flying capacitor totem-pole PFC in USB TypeC Power Delivery (PD) for aircraft applications. The switching frequency and PFC inductor current ripple are varied to set the PFC inductance variation range and design the differential mode (DM) and common mode (CM) filter to meet the EMI requirement in the DO-160 standard. The design process for all the magnetic components is described with results at different switching frequencies and current ripples. The total volume and loss for all cases with both single-stage and two-stage filters are plotted and compared. Pareto fronts for the two cases are drawn to show the optimal design parameters for the application.

Premium content

Design of High Current, High Power Density GaN Based Motor Drive for All Electric Aircraft Application

Downloads

Next from IEEE WiPDA 2022

3kV 6.7MΩ·cm² 4H-SiC BJT with an Effective Junction Termination Extension (JTE)

Similar lecture

DFH-GAN: A Deep Face Hashing with Generative Adversarial Network

Stay up to date with the latest Underline news!

PRESENTATIONS

CONFERENCES

COMPANY

RESOURCES