Singapore

Two-dimensional (2D) transition metal carbides Mn+1Xn labeled as MXene derived from ternary transition metal carbides MAX (Mn+1AXn) phases attract increasing attention due to their promising applications as Li-Ion battery anodes, hybrid electro-chemical capacitors and electronic devices, etc. Experimentally, most MXenes are synthesized by chemical etching the “A” layers from MAX phases. So far, MXene is the largest family of 2D materials as there are over 70 MAX phases available, and clearly, the conventional route of synthesis-property characterization to obtain desirable MXense is time consuming and cost demanding. This talk will highlight our recent work on the prediction and design of MXenes with desired properties by means of ab initio calculations and ab initio molecular dynamics simulations. On the other hand, inspired by the chemical bonding characters of MAX phases and the way of synthesizing MXenes, we further predicted a group of 2D transition metal borides labeled as MBenes from their corresponding layered ternary phases. The theoretical predictions were confirmed by experiments. MBenes also show promise in the application of Li ion batteries and electrocatalysis, etc. Finally, the results of this talk highlight the power of ab initio calculations in accelerating the discovery of novel 2D materials and in the design of desired properties as well.

MATERIALS FOR HUMANITY (MH 21)

Two-Dimensional Transition Metal Carbides and Borides

**Please view our Welcome to MH21 video.**

<center>
<figure class="video_container">
	 <iframe src="https://screencast-o-matic.com/watch/cr1UYHV1pcz?v=6&ff=1&title=0&controls=1" width=826 height=526 frameborder="0" allowfullscreen="true"> </iframe>
</figure>
	</center>


**Walkthrough Video**

Here is a Walkthrough showing how to navigate the conference and network with others 

<center>
<figure class="video_container">
	 <iframe src="https://screencast-o-matic.com/watch/cr1vnrV1paE?v=6&ff=1&title=0&controls=1" width=826 height=526 frameborder="0" allowfullscreen="true"> </iframe>
</figure>
	</center>




	 Organized by
 
<a href="https://mrs.org.sg/">
<img src="https://assets.underline.io/uploads/markdown_image/1/image/95d5789689d5f900b90e9fe54ea3cf0d.jpg"</a>

 
	
	 In association with
 
<a href="http://www.ntu.edu.sg/">
<img src="https://assets.underline.io/uploads/markdown_image/1/image/334cd171ad2fdee033c635b368e5e160.png"</a>
	<a href="https://www.nus.edu.sg/">
<img src="https://assets.underline.io/uploads/markdown_image/1/image/32e6f82c0440f7bb24c590f9f67821bd.png"</a>
		<a href="https://www.a-star.edu.sg/">
<img src="https://assets.underline.io/uploads/markdown_image/1/image/72557865b589cfa3d2a0243ffce4a270.png"</a>
	
 


	 Supported by
 
		 <a href="https://www.visitsingapore.com/mice/en/about-us/about-secb/">
<img src="https://assets.underline.io/uploads/markdown_image/1/image/6e679842ead62be522ba6a630b82d5c9.png"</a>

To access the MH 21 Conference, [please register](https://mh21.mrs.org.sg/event/da3f9651-429f-4763-81b2-ebd7311b6bc8/websitePage:206f7605-1731-41f9-8421-56d3890f398f)

MH 21 is arranged around 6 themes that focus attention on pressing needs that should be addressed to enhance the well-being of communities and provide a forum for presenting breakthrough discoveries.

technical paper

Nature produces a variety of materials with many functions, often out of simple and abundant materials, and at low energy. Such systems - examples of which include silk, bone, nacre or diatoms - provide broad inspiration for engineering. Here we explore the translation of biological composites to engineering applications, using a variety of tools including molecular modeling, AI and machine learning, and experimental synthesis and characterization. We review a series of studies focused on the mechanical behavior of materials, especially fracture, and how these phenomena can be modeled using a combination of molecular dynamics and machine learning. We also present various case studies of hierarchical material optimization using genetic algorithms, applied to 3D printed composites, and protein design.

Computational material synthesis: Atomistic and molecular dynamics, composites, and bio-inspired AI

Laser-powder bed fusion (L-PBF) of alloys often leads to large, elongated grains, which are the cause for anisotropic mechanical properties and, sometimes, solidification cracking. While grain refinement has been used before in the design of Al alloys for AM in order to avoid these issues, it is much less common in steels. Here, we report that Ti(O,N) is an effective inoculant for ferritic steels, owing to the Baker-Nutting crystallographic orientation relationship and matching lattice constants. We show that this inoculating phase can be added to steel powder ex situ as TiN micro-powder, but that it also can be formed in sub-µm-size in the melt by reaction of the alloying element Ti with nitrogen from the process atmosphere. Thereby, the refining effect can be “switched” by the choice of process gas. By both, in-situ synthesis and ex-situ addition, ultrafine grains with an average diameter just larger than 1 µm and a completely random texture are achieved. We show that this refinement method is effective in several ferritic steels (Fe-Ti, Fe-Al, Fe-Cr) and discuss the required amount of Ti addition. The addition of 5wt.-%Ti to Fe-19wt.-%Cr leads to a doubling of the yield strength and UTS, which we argue is mostly due to the grain refinement by Ti(O,N).

Ultrafine-grained ferritic steels by L-PBF via ex-situ addition or in-situ synthesis of inoculants

Porosity in laser powder bed fusion is a concern due to the influence of such defects on mechanical properties of parts. Different mechanisms lead to different types and shapes of pores, in different quantities and it is important to be cognizant of these differences, for best approaches to minimize their formation and even remove them by different methods. Results are presented showing how this can be done for different types of pores in the laser powder bed fusion of metals.

Porosity in laser powder bed fusion of metals

We recently presented a new approach inspired by the strengthening mechanisms in crystalliine alloys to design a new class of damage-tolerant architected materials called meta-crystals [1, 2][1]. The mimicry of crystalline microstructure enables a uniquely new way to program meta-crystals to have a defined set of properties in response to the changes in surrounding environments. While crystal-inspired structures can be readily changed via computer-aided design, the intrinsic microstructure of materials can be tailored by changing the base material and processing parameters used to fabricate the meta-crystals. The combined opportunity offered by the crystal-inspired approach opens the new paradigm of engineering and programming materials with desired mechanical properties. In this talk, I will present our studies of the programming of meta-crystals such as store, communication and actuation of mechanical information.

Reference
[1] Pham M-S, Liu C, Todd I, Lertthanasarn J. Damage-tolerant architected materials inspired by crystal microstructure. Nature 2019;565:305.[1] Lertthanasarn J, et al. Synergistic effects of crystalline microstructure, architected mesostructure, and processing defects on the mechanical behaviour of Ti6Al4V meta-crystals. Materials Science and Engineering: A 2021;818:141436.
[2] Liu C, Lertthanasarn J., Pham M-S The origin of the boundary strengthening in meta-crystal architected materials. Nature Communications 2021 (accepted).

Mechanical programmable meta-crystals

Synthesis of magnetic nanoparticles for rapid quantification of mycotoxins and pesticide residue in foods

In IMRE, we developed a series of technologies for cascade utilization of SCG to achieve “zero waste”. The whole process includes solvent extraction, transesterification, compounding, moulding etc, and we are able to obtain various functional materials from SCG, such as coffee oil, surfactants, bioplastics. 

Cascade utilization of spent coffee grounds towards a zero-waste strategy

Our group has optimised and performed the pyrolysis of PE, PP and PS plastics alongside 2 commonly found waste plastic with good conversion rates and selectivity. The incineration ash and pyrolysis oil generated will be characterised and attempts will be made to functionalise them into specialty chemicals. 

Catalytic pyrolysis of plastic waste with incineration fly ash into fuels for upcycling

Spent coffee grounds (SCGs) are often disposed by conventional waste disposal methods which are environmentally unfriendly. As such, we aim to maximize the potential of SCGs for coffee oil and as a filler material for bio-based composites. Approximately 10 % of coffee oil was successfully extracted from the SCGs. Its chemical composition was evaluated and was proven to exhibit radical scavenging activity. Afterwards, the extracted SCGs (ESCGs) were added as fillers into epoxy resin to form ESCG composites. Although the composites displayed lower mechanical properties relative to epoxy, improvements were seen for ESCG composites in comparison to SCG composites. Composites filled with acetone ESCGs demonstrated the most improvement with tensile strength, flexural modulus and flexural strength up to 23.4 MPa, 3.02 GPa and 42.9 MPa respectively. This work suggests an alternative method to repurpose common food waste while moving towards a more sustainable future.

An environmental alternative to composites using waste coffee grounds

1) Traditional Thermosets:
Excellent mechanical strength,
Thermal stability,
Solvent resistance.
2) Vitrimers (recyclable thermosets)
Excellent mechanical strength,
Good recyclability
Self-healing and repairing

Catalyst-Free Epoxy Vitrimer for Recyclable and Self-Healing Solid Polymer Electrolytes

Super-absorbent fabric can provide a durable and comfortable protective microenvironment for the protective clothing users. In this work, we prepared the recirculated super-absorbent and strong water-retaining fabrics by depositing starch-based double network (St-PAA/SA) aerogel on fiber surface via graft-cross-linking copolymerization and freeze-drying strategy, with two biological macromolecules of starch and sodium alginate as raw materials, ammonium persulphate (APS) as the initiator, and N, N-methylene bisacrylamide (MBA) as a cross-linking agent. FTIR and XPS provided an evidence for graft copolymerization and cross-linking interaction among St-PAA/SA aerogel. SEM showed that St-PAA/SA aerogel presented typical double network macroporous characteristic, and the pore size distribution was 23~52 μm, which provided space for the absorption and storage of water molecule. Moreover, the strong interactions were excited between St-PAA/SA aerogel and fabric. When the mass ratio of starch to sodium alginate was 7/3, and the molar ratio of APS/MBA/AA was 0.8/0.3/1, the water absorption volume reached 420 g/g, which exceeded that of the super-absorbent fiber (120 g/g). Also, the super-absorbent fabric exhibited strong water storage capacity and excellent characteristics of recirculated water-absorbent and storage. The water absorption and softness of the fabric can be adjusted by controlling the aerogel deposition amount. This work provides a new way for the development of comfortable medical protective fabrics.

Premium content

Two-Dimensional Transition Metal Carbides and Borides

Downloads

Next from MATERIALS FOR HUMANITY (MH 21)

Computational material synthesis: Atomistic and molecular dynamics, composites, and bio-inspired AI

Similar lecture

Composite resin to enhance interface between matrix and fiber in continuous fiber reinforced thermoplastic composites

Stay up to date with the latest Underline news!

PRESENTATIONS

CONFERENCES

COMPANY

RESOURCES