United States

We investigated the combination of maskless UV lithography and 2PP (two-photon polymerization) on a standard photo-resist: SU-8. 2PP technology is known to be slow. The advantage of mixing the technologies becomes obvious when some elements of a design can be exposed faster using maskless UV lithography.

EIPBN 2021

Hybrid 2D &amp; 3D Lithography

The 15th Joint MMM-INTERMAG Conference (2022 Joint) is sponsored jointly by AIP Publishing and the IEEE Magnetics Society. Members of the international scientific and engineering communities interested in recent developments in fundamental and applied magnetism are invited to attend and contribute to the technical sessions. The technical program will include invited and contributed papers in oral and poster sessions, invited symposia, a plenary session, and an evening session, with about 1500 presentations overall. This Conference provides an outstanding opportunity for worldwide participants to meet their colleagues and collaborators and discuss developments in all areas of magnetism research.

The 2022 Joint Conference will offer both in-person and prerecorded on-demand content.

For tickets to the event, please register at the following link: https://magnetism.org/register

Please register for the Joint MMM-Intermag conference to join the event.

2022 Joint MMM-INTERMAG

This Conference provides an outstanding opportunity for worldwide participants to meet their colleagues and collaborators and discuss developments in all areas of magnetism research.

Hybrid 2D & 3D Lithography

technical paper

The International Conference on Electron, Ion and Photon Beam Technology and Nanofabrication (EIPBN), affectionately known as "3-Beams," is the premier gathering of scientists and engineers who are dedicated to electron, ion and photon lithography, imaging, and analysis; atomically precise fabrication; nanofabrication process technologies and related emerging technologies; and their applications in a broad spectrum of fields. In its 64th meeting, researchers from academia, government laboratories, and industry from around the world meet to present and discuss recent and future trends in these technologies.
 
 
 
[![](https://assets.underline.io/uploads/markdown_image/1/image/4bdf4450aa93073cd684b096b403df2e.png)](https://drive.google.com/file/d/1CPaA3-Yf7_maBxJMUJaUORLF3HGO9CIe/view?usp=sharing) [![](https://assets.underline.io/uploads/markdown_image/1/image/cea8a407085dee5422a2c16738ce27ca.png)](https://eipbn.org/abstracts/2021/)

To register for this event, please follow the link below.

Nano fabrication technologies are subject of research in several fields. The development and commercialization of nano-inside products are still waiting for its break through. However, this paper will describe three examples of research workin fields of bioinspired computing, nano patterned surfaces for flexible substrates, and nano optics for spectroscopic measurement.

 How to implement “nano” in everyday life? Nano fabrication technologies in application oriented research and development

This work is about using near-field phase lithography and ALD process repeatedly to create non-uniform nanolattices with spatially varying geometry and material composition. The proposed approach is also employed to make an antireflection GRIN surface which successfully reduces the specular reflectance by more than 60%.

 Gradient-Index Nanolattices Using Multilayer Processing

We demonstrate for the first time that anisotropic hydrofluoric acid etch behavior beneath certain metal pads (Ti, Au, Pt, Cr) can be controlled to create ultra-sharp 3D silica pyramids due to an interface effect.

Fabrication of silica pyramids by enhanced lateral etching of hydrofluoric acid below metal films

Organic soft materials, such as gels are materials of choice for a vast number of biomedical applications such as tissue engineering, soft robotics, biosensing, drug delivery, implantable electronics, etc. Here we report on in-liquid direct write technique for 3D-sculpturing of hydrogels using focused electron and X-ray beams.

Electron and X-ray Beam Direct Write Lithography in Liquids: a Step Toward 3D Nanoprinting of Soft Materials

High aspect ratio nanostructuring requires high precision pattern transfer with highly directional etching. In this work, we demonstrate the fabrication of structures with unprecedented ultra-high aspect ratios up to 10’000:1 in the nanoscale regime (down to 10 nm) by metal assisted chemical etching (MacEtch) of silicon in gas phase.

Nanofabrication by Metal Assisted Chemical Etching of Silicon in Gas Phase

In this paper we report a series of breakthroughs that led to replication of gratings with a slant angle up to 60° and an aspect ratio of 10:1 in a material with refractive index of 1.90 (RI). A study of the replication process and materials optimization will be presented.

Nanoimprint process to mass manufacture highly-angled high-RI gratings for augmented reality combiners

Sequential vapor infiltration (SVI) with trimethylaluminum into UV-cured films visualized the presence of internal layered structures with different Al distributions dependent on chemical structure of monomers. X-ray reflectivity measurements revealed that the mixing of monomers was a positive way to homogenize the Al distributions in UV-cured films.

Internal Layered Structures of UV-Cured Thin Films after Sequential Vapor Infiltration Analyzed by X-ray Reflectivity Measurements

Until now, no in-situ, non-destructive and accurate technology has been invented, which introduces huge difficulties into the superhydrophobic surfaces research and applications. We developed an optical technology to characterize the state of superhydrophobic surface.

Optical Metrology of Characterizing Superhydrophobic States on Patterned Substrates

In direct writing laser lithography, hybrid structures such as gratings on top of resist structures can be generated by combining thermal NIL with DWL lithography. At 120 °C, it is still possible to pattern the resist into at least 4 µm depth without degrading the photosensitive component.

Hybrid structures achieved by direct writing laser lithography - tuning the contrast and surface topography of grayscale photoresist with nanoimprint lithography

Colors produced from nanostructures of different geometries and materials in 2D and 3D made mostly using 3D printing with two-photon polymerization.

Premium content

Downloads

Next from EIPBN 2021

How to implement “nano” in everyday life? Nano fabrication technologies in application oriented research and development

Similar lecture

Reduction of power consumption and micromagnetic instabilities associated with domain wall dynamics in perpendicular magnetic tunnel junction nanopillars

Stay up to date with the latest Underline news!

PRESENTATIONS

CONFERENCES

COMPANY

RESOURCES