United States

This talk will review applications of the Cs+ Low Temperature Ion Source (LoTIS). This ion source enables high precision FIB imaging and machining, and also high-yield secondary ion mass spectrometry (SIMS)

EIPBN 2021

Applications of the Cesium Low Temperature Ion Source

sims

ion source

**WELCOME TO THE 2021 CAP VIRTUAL CONGRESS UNDERLINE PLATFORM**

The CAP staff and our organizing and program committees are pleased to welcome you to our 2021 Congress filled with plenary talks, technical sessions/talks, student presentations and competition sessions, workshops, and several symposia offered by the CAP divisions and its partners.  

You will also have opportunities to network with other delegates through the Gathertown platform accessed by selecting the lounge or posters button on the left.

Registered delegates should use the schedule button to call up the details of the session/event they wish to attend.  Each sessions includes a link to access the online platform where the event is taking place, either within Underline or through other Congress-related Zoom meetings.  

Invited speaker talks are identified with an (I), and student competitors include a (G*) or (U*) to identify graduate or undergraduate presenters.

Please take the time to check out the information about our sponsors and exhibitors, request further information, or leave a note of thanks for their support.

General information about the Congress can be found on the CAP website Congress pages at https://www.cap.ca/congress/2021.

Looking for a specific talk?   A full searchable list is available on our Indico Congress site at https://indico.cern.ch/event/985448/contributions/

We look forward to sharing this exciting week with you!


CAP Virtual Congress 2021

invited talk

The International Conference on Electron, Ion and Photon Beam Technology and Nanofabrication (EIPBN), affectionately known as "3-Beams," is the premier gathering of scientists and engineers who are dedicated to electron, ion and photon lithography, imaging, and analysis; atomically precise fabrication; nanofabrication process technologies and related emerging technologies; and their applications in a broad spectrum of fields. In its 64th meeting, researchers from academia, government laboratories, and industry from around the world meet to present and discuss recent and future trends in these technologies.
 
 
 
[![](https://assets.underline.io/uploads/markdown_image/1/image/4bdf4450aa93073cd684b096b403df2e.png)](https://drive.google.com/file/d/1CPaA3-Yf7_maBxJMUJaUORLF3HGO9CIe/view?usp=sharing) [![](https://assets.underline.io/uploads/markdown_image/1/image/cea8a407085dee5422a2c16738ce27ca.png)](https://eipbn.org/abstracts/2021/)

To register for this event, please follow the link below.

We investigate the surface wetting properties for a range of micro/nanofabricated topography on aluminium surfaces supported by ion-beam processing to enhance liquid-solid interaction.

Surface Wetting on Micro-milled or Laser-Etched Aluminium with Ion-Beam Post-Processing

This work presents the analysis of spike, burst, and network burst activity in a microfluidic brain-on-chip. A collection of activities in the electrophysiological recordings, measured by multielectrode arrays, provided strong clues for the maintenance of human induced pluripotent stem cells-derived cortical neuron cultures in 3D for 37 days.

Detection of network burst activity in a MEMS-based 3D neuronal cell culture system

This work explored an accessible and cost-effective way to prepare high quality 2D Bi and derivatives on SiO2/Si substrates by e-beam evaporation. The electrical and thermoelectric properties were characterized. Our study builds a platform to realize high-quality 2D Bi, which may also be suitable in other Xenes.

Tuning Electrical Properties of E-beam Evaporated 2D Bi and Derivatives

In this study, we investigated whether UV-cured resin thin films modified by atomic layer deposition (ALD) could be removed completely by dry etching procedures. UV-nanoimprinted deposition masks were removed completely by sequential physical and chemical dry etching procedures, to demonstrate and area selective deposition of aluminum oxide.

Nanoimprinted Deposition Masks for Area Selective Atomic Layer Deposition of Aluminum Oxide

Long silver rods SERS layer was constructed by using fine grit (1µm) sandpaper as a template for imprinting nano-patterns. Therefore, costly nano lithographic processing was avoided. Raman spectra of R6G were obtained. The signal strength decreased linearly at reduced concentrations in logarithmic scale, as expected for SERS, down to 1nM.

 Low Cost Nano Imprint for Surface Enhanced Raman Scattering

In this work, we apply multilayer etching mask and optimize the etch process to improve etching rate and etching selectivity to pattern sapphire antireflection nanostructures. Initial results show 2-D sapphire nanostructures with 530 nm width and 470 nm height, resulting in two-fold aspect ratio enhancement over previous work.

Plasma Etching of High Aspect ratio Sapphire Antireflection Nanostructures Using Multilayer Etching Mask

Plasmonic biosensors have been attracted growing attentions in recent years because of their unique properties of high sensitivity, label-free operation, and suitable for high-throughput real-time detection. Here, we proposed a facile, use-friendly and cost-effective image-based plasmonic biosensor to detect the concentration of various biomolecule.

Nanotransfer printing of plasmonic nanostructures on convex lens for highly sensitive image-based biosensing

Optical metasurfaces have emerged as potential candidates for next generation optical devices due to their ability to manipulate the amplitude, phase, wavenumber, and polarization of light1. They are two dimensional subwavelength structures which are engineered to abruptly impart a desired property shift to the impinging optical wavefront. Huygens metasurfaces comprise of an array of optical resonators where each resonator acts as a point source causing light to propagate in the forward direction. In our work, these metasurfaces are made using vanadium dioxide, which was chosen as a good candidate because it exhibits a reversible metal-insulator transition above 68oC. Vanadium dioxide is known for its thermochromic property, making it a promising material for smart energy-saving windows2. In this report, we present a bottom-up fabrication process for vanadium dioxide metasurfaces useful for optical modulation at short wave infrared wavelengths (SWIR). Thin films of vanadium dioxide are fabricated using pulsed laser ablation of a vanadium pentoxide target on a quartz substrate. This is done using a KrF excimer laser while flowing oxygen gas into the vacuum chamber during ablation. Electron-sensitive resist (PMMA) is spun on the film and functions as a stencil for patterning using electron beam lithography. Different hard masks have been used to achieve etched features that closely match geometries designed using finite element analysis for specific behaviors. We present results of fabricated nanoantennas using fluorine- and chlorine-based etch processes. We propose that chlorine-based etch recipes are preferred in order to achieve good anisotropy and accurate nanoscale dimensions for optical device applications.

Fabrication of Dynamically Tunable Vanadium Dioxide Huygens Metasurfaces for Optical Modulation

Electrochemical methods have stood out as the most promising since they can detect liquid-phase explosives. Moreover, they are simple, inexpensive, suitable for portable sensors, work at ambient conditions, and have high sensitivity and selectivity for nitro-compound.

Amperometric detection of nitro compounds using novel nanomaterial composite

In this work, a geometric model was developed using line-by-line assembly of non-monodispersed binary nanoparticles to obtain a randomly closed packed assembly structure. To validate the results from the script, a binary nanoparticle assembly was experimentally fabricated. The experimental and simulated FFT peak frequencies were compare.

Premium content

Downloads

Next from EIPBN 2021

Surface Wetting on Micro-milled or Laser-Etched Aluminium with Ion-Beam Post-Processing

Similar lecture

Negative Ion Source Development for Accelerator Mass Spectrometry

Stay up to date with the latest Underline news!

PRESENTATIONS

CONFERENCES

COMPANY

RESOURCES