Dominican Republic

Influence functions approximate the &quot;influences&quot; of training data-points for test predictions and have a wide variety of applications. Despite the popularity, their computational cost does not scale well with model and training data size. We present FastIF, a set of simple modifications to influence functions that significantly improves their run-time. We use k-Nearest Neighbors (kNN) to narrow the search space down to a subset of good candidate data points, identify the configurations that best balance the speed-quality trade-off in estimating the inverse Hessian-vector product, and introduce a fast parallel variant. Our proposed method achieves about 80X speedup while being highly correlated with the original influence values. With the availability of the fast influence functions, we demonstrate their usefulness in four applications. First, we examine whether influential data-points can &quot;explain&quot; test time behavior using the framework of simulatability. Second, we visualize the influence interactions between training and test data-points. Third, we show that we can correct model errors by additional fine-tuning on certain influential data-points, improving the accuracy of a trained MultiNLI model by 2.5% on the HANS dataset. Finally, we experiment with a similar setup but fine-tuning on datapoints not seen during training, improving the model accuracy by 2.8% and 1.7% on HANS and ANLI datasets respectively. Overall, our fast influence functions can be efficiently applied to large models and datasets, and our experiments demonstrate the potential of influence functions in model interpretation and correcting model errors.

EMNLP 2021

FastIF: Scalable Influence Functions for Efficient Model Interpretation and Debugging

EMNLP 2021 is planned to be a hybrid event in Punta Cana, Dominican Republic, with both on-site and fully virtual participation possible. The experience for on-site participants would closely approximate a normal pre-COVID *ACL conference, with 5-6 thematically organized parallel sessions and live Q/A and interactive discussion immediately after the talks. Presentations by virtual participants will be equitably interleaved with those of on-site participants, projected on the auditorium screens as if on-site, and also followed immediately by live Q/A and interactive discussion at a time during reasonable waking hours for the virtual presenter. For all participants, on-site and virtual, who are unable to attend a session due to either time-zone issues or because they are participating in another session live, talk recordings and slides will be available online at a minimum after the live presentation (and in many cases before as well), and questions may be submitted in advance on session-specific discussion boards and answered live in session with the usual visual aids if desired.

<iframe style="width:700px;height:400px" src="https://online.fliphtml5.com/ebtyf/ceby/"  seamless="seamless" scrolling="no" frameborder="0" allowtransparency="true" allowfullscreen="true" ></iframe>

Please Note: The EMNLP registration system is not currently connected to the underline site as we are still in the process of building out EMNLP 2021. You will receive access instructions from underline the week of November 1st. 

Access is given only to EMNLP upon registration, if you have not registered please do so [here](https://2021.emnlp.org/registration).

Registered attendees will receive access the week of November 1st.

EMNLP 2021 is planned to be a hybrid event in Punta Cana, Dominican Republic, with both on-site and fully virtual participation possible.

Influence functions approximate the "influences" of training data-points for test predictions and have a wide variety of applications. Despite the popularity, their computational cost does not scale well with model and training data size. We present FastIF, a set of simple modifications to influence functions that significantly improves their run-time. We use k-Nearest Neighbors (kNN) to narrow the search space down to a subset of good candidate data points, identify the configurations that best balance the speed-quality trade-off in estimating the inverse Hessian-vector product, and introduce a fast parallel variant. Our proposed method achieves about 80X speedup while being highly correlated with the original influence values. With the availability of the fast influence functions, we demonstrate their usefulness in four applications. First, we examine whether influential data-points can "explain" test time behavior using the framework of simulatability. Second, we visualize the influence interactions between training and test data-points. Third, we show that we can correct model errors by additional fine-tuning on certain influential data-points, improving the accuracy of a trained MultiNLI model by 2.5% on the HANS dataset. Finally, we experiment with a similar setup but fine-tuning on datapoints not seen during training, improving the model accuracy by 2.8% and 1.7% on HANS and ANLI datasets respectively. Overall, our fast influence functions can be efficiently applied to large models and datasets, and our experiments demonstrate the potential of influence functions in model interpretation and correcting model errors.

technical paper

As a prominent attribution-based explanation algorithm, Integrated Gradients (IG) is widely adopted due to its desirable explanation axioms and the ease of gradient computation. It measures feature importance by averaging the model’s output gradient interpolated along a straight-line path in the input data space. However, such straight-line interpolated points are not representative of text data due to the inherent discreteness of the word embedding space. This questions the faithfulness of the gradients computed at the interpolated points and consequently, the quality of the generated explanations. Here we propose Discretized Integrated Gradients (DIG), which allows effective attribution along non-linear interpolation paths. We develop two interpolation strategies for the discrete word embedding space that generates interpolation points that lie close to actual words in the embedding space, yielding more faithful gradient computation. We demonstrate the effectiveness of DIG over IG through experimental and human evaluations on multiple sentiment classification datasets. We provide the source code of DIG to encourage reproducible research.

Discretized Integrated Gradients for Explaining Language Models

Sequence models are a critical component of modern NLP systems, but their predictions are difficult to explain. We consider model explanations though rationales, subsets of context that can explain individual model predictions. We find sequential rationales by solving a combinatorial optimization: the best rationale is the smallest subset of input tokens that would predict the same output as the full sequence. Enumerating all subsets is intractable, so we propose an efficient greedy algorithm to approximate this objective. The algorithm, which is called greedy rationalization, applies to any model. For this approach to be effective, the model should form compatible conditional distributions when making predictions on incomplete subsets of the context. This condition can be enforced with a short fine- tuning step. We study greedy rationalization on language modeling and machine translation. Compared to existing baselines, greedy rationalization is best at optimizing the combinatorial objective and provides the most faithful rationales. On a new dataset of annotated sequential rationales, greedy rationales are most similar to human rationales.

Rationales for Sequential Predictions

Recent coreference resolution models rely heavily on span representations to find coreference links between word spans. As the number of spans is O(n2) in the length of text and the number of potential links is O(n4), various pruning techniques are necessary to make this approach computationally feasible. We propose instead to consider coreference links between individual words rather than word spans and then reconstruct the word spans. This reduces the complexity of the coreference model to O(n2) and allows it to consider all potential mentions without pruning any of them out. We also demonstrate that, with these changes, SpanBERT for coreference resolution will be significantly outperformed by RoBERTa. While being highly efficient, our model performs competitively with recent coreference resolution systems on the OntoNotes benchmark.

Word-Level Coreference Resolution

Multi-task auxiliary learning utilizes a set of relevant auxiliary tasks to improve the performance of a primary task. A common usage is to manually select multiple auxiliary tasks for multi-task learning on all data, which raises two issues: (1) selecting beneficial auxiliary tasks for a primary task is nontrivial; (2) when the auxiliary datasets are large, training on all data becomes time-expensive and impractical. Therefore, this paper focuses on addressing these problems and proposes a time efficient sampling method to select the data that is most relevant to the primary task. The proposed method allows us to only train on the most beneficial sub-datasets from the auxiliary tasks, achieving efficient multi-task auxiliary learning. The experiments on three benchmark datasets (RTE, MRPC, STS-B) show that our method significantly outperforms random sampling and ST-DNN. Also, by applying our method, the model can surpass fully-trained MT-DNN on RTE, MRPC, STS-B, using only 50%, 66%, and 1% of data, respectively.

Efficient Multi-Task Auxiliary Learning: Selecting Auxiliary Data by Feature Similarity

Providing pretrained language models with simple task descriptions in natural language enables them to solve some tasks in a fully unsupervised fashion. Moreover, when combined with regular learning from examples, this idea yields impressive few-shot results for a wide range of text classification tasks. It is also a promising direction to improve data efficiency in generative settings, but there are several challenges to using a combination of task descriptions and example-based learning for text generation. In particular, it is crucial to find task descriptions that are easy to understand for the pretrained model and to ensure that it actually makes good use of them; furthermore, effective measures against overfitting have to be implemented. In this paper, we show how these challenges can be tackled: We introduce GenPET, a method for text generation that is based on pattern-exploiting training, a recent approach for combining textual instructions with supervised learning that only works for classification tasks. On several summarization and headline generation datasets, GenPET gives consistent improvements over strong baselines in few-shot settings.

Few-Shot Text Generation with Natural Language Instructions

Recently, some studies have shown that text classification tasks are vulnerable to poisoning and evasion attacks. However, little work has investigated attacks against decision-making algorithms that use text embeddings, and their output is a ranking. In this paper, we focus on ranking algorithms for the recruitment process that employ text embeddings for ranking applicants' resumes when compared to a job description. We demonstrate both white-box and black-box attacks that identify text items that, based on their location in embedding space, have a significant contribution in increasing the similarity score between a resume and a job description. The adversary then uses these text items to improve the ranking of their resume among others. We tested recruitment algorithms that use the similarity scores obtained from Universal Sentence Encoder (USE) and Term Frequency–Inverse Document Frequency (TF-IDF) vectors. Our results show that in both adversarial settings, on average the attacker is successful. We also found that attacks against TF-IDF are more successful compared to USE.

Attacks against Ranking Algorithms with Text Embeddings: {A} Case Study on Recruitment Algorithms

How Does BERT Rerank Passages? An Attribution Analysis with Information Bottlenecks

We propose a simple yet effective Multi-Layer RAndom Perturbation Training algorithm (RAPT) to enhance model robustness and generalization. The key idea is to apply randomly sampled noise to each input to generate label-preserving artificial input points. To encourage the model to generate more diverse examples, the noise is added to a combination of the model layers. Then, our model regularizes the posterior difference between clean and noisy inputs. We apply RAPT towards robust and efficient BERT training and conduct comprehensive fine-tuning experiments on GLUEtasks. Our results show that RAPT outperforms the standard fine-tuning approach and adversarial training method, yet with 22% less training time.

Multi-Layer Random Perturbation Training for improving Model Generalization Efficiently

Current research in automatic summarisation is unapologetically anglo-centred - a persistent state-of-affairs, which also predates neural net approaches. High-quality automatic summarisation datasets are notoriously expensive to create, posing a challenge for any language. However, with digitalisation, archiving, and social media advertising of newswire articles, recent work has shown how, with careful methodology application, large-scale datasets can now be simply gathered instead of written. In this paper, we present a large-scale multi-lingual summarisation dataset containing articles in 92 languages, spread across 28.8 million articles, in more than 35 writing scripts. This is both the largest, most inclusive, exist- ing automatic summarisation dataset, as well as one of the largest, most inclusive, ever published datasets for any NLP task. We present the first investigation on the efficacy of resource building from news platforms in the low-resource language setting. Finally, we provide some first insight on how low-resource language settings impact state-of-the-art automatic summarisation system performance.

MassiveSumm: a very large-scale, very multilingual, news summarisation dataset

This paper presents a novel unsupervised abstractive summarization method for opinionated texts. While the basic variational autoencoder-based models assume a unimodal Gaussian prior for the latent code of sentences, we alternate it with a recursive Gaussian mixture, where each mixture component corresponds to the latent code of a topic sentence and is mixed by a tree-structured topic distribution. By decoding each Gaussian component, we generate sentences with tree-structured topic guidance, where the root sentence conveys generic content, and the leaf sentences describe specific topics. Experimental results demonstrate that the generated topic sentences are appropriate as a summary of opinionated texts, which are more informative and cover more input contents than those generated by the recent unsupervised summarization model (Bražinskas et al., 2020). Furthermore, we demonstrate that the variance of latent Gaussians represents the granularity of sentences, analogous to Gaussian word embedding (Vilnis and McCallum, 2015).

FastIF: Scalable Influence Functions for Efficient Model Interpretation and Debugging

Downloads

Next from EMNLP 2021

Discretized Integrated Gradients for Explaining Language Models

Similar lecture

Open Aspect Target Sentiment Classification with Natural Language Prompts

Stay up to date with the latest Underline news!

PRESENTATIONS

CONFERENCES

COMPANY

RESOURCES

FastIF: Scalable Influence Functions for Efficient Model Interpretation and Debugging

.css-70qvj9{display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-align-items:center;-webkit-box-align:center;-ms-flex-align:center;align-items:center;}Downloads

Next from EMNLP 2021

Discretized Integrated Gradients for Explaining Language Models

Similar lecture

Open Aspect Target Sentiment Classification with Natural Language Prompts

Stay up to date with the latest Underline news!

PRESENTATIONS

CONFERENCES

COMPANY

RESOURCES

Downloads